I get so many questions about my favorite skirts, and after months of saying that I am thinking about writing a tutorial for them, I’m actually doing it!
Disclaimer: I don’t really know what I’m doing. I stumbled upon this skirt method when I realized that the Yard Sale Wrap Skirt in Heather Ross’s Weekend Sewing almost exactly fit me with 6 panels. I know from making these enough that if I use a 5/8″-3/4″ seam allowance on the panels, the skirt will fit. The waistband/zipper instructions are totally MacGyvered.
What you’ll need (all fabric should be prewashed and ironed):
2 yards of main fabric
(optional) 1/4th yard contrasting fabric for waistband
An invisible zipper (and invisible zipper foot–don’t stress, these are like $3 and in the zipper aisle)
If you want to be really fancy about it, you could also get a hook and eye for the top of the zipper. (I’m not that fancy.)
Heather Ross’s Weekend Sewing Yard Sale Wrap Skirt pattern (if you don’t have this book yet, it’s totally worth purchasing it. There are sooooooo many good patterns that it’s not a waste to buy it for this panel–you’ll end up making plenty of other things–I promise!)
A serger These instructions take advantage of a serger’s time saving benefits. If you’re sewing this skirt without a serger, you’ll want to use the french seam and hand rolled hem instructions from the Yard Sale Wrap Skirt pattern instructions. If you’re looking at doing a moderate amount of garment sewing, I highly recommend searching Craigslist for used Baby Lock Imagine sergers. The Imagine has auto tension and auto threading which takes all the hard serger stuff out of the equation and makes it as easy to use [if not easier] than your sewing machine. While they are a complete extravagance new (around $1500-$1800),if you are patient, you can occassionally find them on Craigslist for $300-$500.
Waist adjustments to the panels: I’m 5’5″ and 130lbs and for me, 6 panels with a slightly larger than usual seam allowance works for this skirt in the width. To make this skirt properly, you could find out your measurements and do the proper math to figure out the measurements of the panel width at the top. Or, if you’re reckless and lazy like me, you could sew the panels together in one long line, hold it up to yourself, see how it fits, and make adjustments as needed.
Length adjustments: I took off about 5″ off the skirt to keep it right at my knee. I didn’t want to lose the twirl, though, so I had to redraw the side lines and make the angle a little more dramatic. Your goal is to end up with a shorter panel, but have that panel be just as wide at the bottom as the original. Here’s a shot of how I redrafted my panel (since I had already made the original for my first yard sale wrap skirt).
Fold your fabric so that the selvedges are perpendicular to the fold line, and cut your 6 panels. (Your waistband can be cut from the top section of leftover fabric, or, if you have enough room, it can be cut selvedge to selvedge.)
Cut your waistband. This can be done by either cutting two strips (that you will sew together and have the seam be at the top of the waistband) or cutting a wider strip that you will fold in half. In the past, I’ve always gone with the two strip option, but this time I tried out folding. Either works perfectly. My waistbands have been a variety of widths in the skirts I’ve made. For this particular version I cut a 5 1/2″ strip that I folded in half. I leave the length of the waistband as selvedge to selvedge and trim it once it’s been sewn to the skirt body.
Using a serger, sew the 6 panels together to form one long strip of panels. Next, sew your waistband RIGHT SIDE to the WRONG SIDE of your skirt.
On the top of the waistband, fold over and press 1/2″ toward the wrong side. (Tip: Use one of these hem guides to ensure accuracy.)
Press the seam at the joining of the waistband/skirt toward the waistband and arrange the skirt so that the waistband lies as straight and flat as possible.
Working from the center outward, fold the waistband over so that it just covers the seam and pin it to the right side of the fabric. (Tip: I took this photo halfway through–I use twice that number of pins to prevent stretching/shifting–the top layer of the waistband always wants to stretch for me.)
At this point you’ll cut the waistband so that it fits the skirt body, continuing the angle of the skirt panel so that the waistband is slightly narrower at the top than at the base (since your waist narrows as you get higher up it).
Tip: I usually break here for the evening and start again fresh for the zipper portion. If this is your first invisible zipper, check out an invisible zipper tutorial before continuing.
(Warning: I’m going to be absolutely worthless as describing the next few steps, so if you look at the pictures and it still doesn’t make sense, just let me know.)
Using a seam ripper or scissors, pick apart the stitches holding the waistband to the skirt so that you can unfold the waistband where you will insert your zipper.
Align and pin your invisible zipper to the edge of the waistband/skirt panel, right side of the zipper to the right side of fabric. The top of the active part of the zipper needs to align to the fold or seam at the top of the waistband. DO NOT PIN THE ZIPPER TO THE BACKSIDE OF THE WAISTBAND–only to the front.
Sew the zipper to the fabric and then repeat on the other side. Your goal is for the waistband to line up well.
Fold over the waistband, enclosing the top part of the zipper within the waistband. Pin. (This photo shows the back of the waistband.)
Topstitch along the bottom of the waistband, removing the pins as you go.
If you zip up your skirt it is ALMOST a skirt. Now you have to sew the seam that continues the line of the zipper. Align the panel edges and sew as closely as possible to the seams that hold in your zipper, following that line down to the hem. I have varying levels of success with this–sometimes my zipper looks pretty good, and sometimes it pokes out a bit at the part where the seam and the zipper meet. I don’t really know what to do differently, though, so I just hope my cardigans hide any zipper issues.
Using the rolled hem stitch on the serger, finish the hem. I like to use a contrasting thread color.
Last step: hand stitch the waistband to the back of the zipper.
I hope this tutorial works for you! If you have any corrections, please let me know!
Tip for wearing this skirt: I recently got a wide belt and it is PERFECT for these skirts. It really helps define the waist and looks more ready-t0-wear and less like you made it! The skirts look super cute with ballet flats or boots and you can usually find me wearing a J Crew Jackie O cardigan [yep--that's the actual name] on top.
If you make one of these, I love to see it! Please link it up: